Working voltage	AC170V - AC250V 50 hz
Load function	200 w or less three wire system
Induction distance	5-12 meters
Induction Angle	around 120 degrees and 120 degrees
Delay time	30 s to 60 s
Sensitivity range	7 or less lux
Applicable load	incandescent, exhaust fan, energy-saving lamp, fluorescent lamp

2. The Matters Needing Attention

Please shut off the power when installing the switch after operation in;
The switch in the dark to work, don't work during the day;
When installation to avoid glare, and light distance is greater than 0.5 m;
This switch is adapted to the light bulbs, energy-saving lamps, and the load power of 200 w or less.Do not short circuit, circuit wrong or overload use;
When this switch is installed into the wall type 1.2 2 m high, like a type suction a top height should be between 3 to 4 meters, otherwise affect the sensitivity of switch;
This product USES for three-wire system design of the connection mode, according to the national electrical standard, see chart;
Then good, after the power supply switch automatically first try, after a few seconds into the working state, our switch three years warranty in normal use.(not including artificial improper use)

3. Notes

Electrician or experienced human can install it.

The unrest objects cannot be regarded the installation basis-face.

In front of the detection window there are not hinder or unrest objects effecting detection.

4. Install The Chart